Coolant Temperature Sensor Explained
What is a 'Coolant Temperature Sensor''?
The coolant temperature sensor (CTS) is commonly found on modern injection engines. It measures the coolant (water) temperature in the engine itself, it is not to be confused with the thermostat as found on car radiators. The Engine Control Unit (ECU) uses the CTS value to calculate the ignition timing and injector pulse duration.
How does a CTS work?
The CTS is a thermistor that measures the temperature and sends a signal back to the ECU. They are typically 2 pin devices. The CTS is immersed in the engine coolant and contains a variable resistor that usually operates on the NTC (Negative Temperature Coefficient) principle.
When the engine is cold the resistance increases. As the engine warms up, so too does the coolant and the resistance of the CTS decreases. This in turn returns a variable voltage signal (analogue) to the ECU based upon the coolant temperature.
The open circuit supply to the sensor is a 5v reference level and this voltage reduces to a value dependent upon the resistance of the CTS resistor. Normal operating temperature is between 80ºC to 100ºC.
Where is the CTS located on the engine?
Depends on what model of engine it is. Common locations are as follows:-
How do test the operation of the CTS?
Read the maintenance guide as shown here.
Article based on text in the Haynes Books series and peoples personal experiences.
The coolant temperature sensor (CTS) is commonly found on modern injection engines. It measures the coolant (water) temperature in the engine itself, it is not to be confused with the thermostat as found on car radiators. The Engine Control Unit (ECU) uses the CTS value to calculate the ignition timing and injector pulse duration.
How does a CTS work?
The CTS is a thermistor that measures the temperature and sends a signal back to the ECU. They are typically 2 pin devices. The CTS is immersed in the engine coolant and contains a variable resistor that usually operates on the NTC (Negative Temperature Coefficient) principle.
When the engine is cold the resistance increases. As the engine warms up, so too does the coolant and the resistance of the CTS decreases. This in turn returns a variable voltage signal (analogue) to the ECU based upon the coolant temperature.
The open circuit supply to the sensor is a 5v reference level and this voltage reduces to a value dependent upon the resistance of the CTS resistor. Normal operating temperature is between 80ºC to 100ºC.
Where is the CTS located on the engine?
Depends on what model of engine it is. Common locations are as follows:-
- In the end of the thermostat housing on the inlet side of the engine.
- In the thermostat housing itself on the exhaust side of the engine.
- Located near the DIS unit alongside the temperature gauge sender on the transmission end of the cylinder head.
How do test the operation of the CTS?
Read the maintenance guide as shown here.
Article based on text in the Haynes Books series and peoples personal experiences.